Sink Plumbing Supplies

Written by | Plumbing Contributor Network

When installing a new sink in one’s home there will definitely be a need for sink plumbing supplies.  Sinks plumbing is a far easier endeavor if the sink installer has all of the sink plumbing supplies that he or she requires before beginning the sinks plumbing project.  Finding sinks plumbing supplies on the Internet can save the homeowner considerable funds, and can make the sink plumbing endeavor a bit more affordable too.

The type of sink plumbing supplies the homeowner will require will of course vary depending greatly upon the type of sink that is being installed.  There are however, some general sink plumbing supplies that are required for every sink installation task.  The homeowner will clearly need to install a sink drain and will therefore require a sink strainer to insert into the hole in the sink’s basin bottom and the drain will need to be correctly sealed off with plumber’s putty.  Plumber’s putty will prevent water leakage when the drain is used.  A rubber gasket will also be required which is fastened beneath the strainer with a retainer or locknut; the latter materials keep the strainer tightly nestled in the sink hole so that it does not move about.

A sink drain will be directly connected to a piece identified as a tailpiece.  The latter piece is mounted to the drain/strainer with additional plumbing supplies identified as threaded coupling.  Additional plumbing supplies include the installation of a drainpipe tee, an escutcheon, a trap, and a drain pipe.  Thus, so far, the homeowner requires the following plumbing supplies to get the plumbing connected to the sink correctly; a strainer, a strainer body, a gasket, a washer, a locknut or retainer, a tailpiece a threaded coupling, a trap, a slip point coupling, and an escutcheon as well as plumber’s putty.

Faucets will also need to be installed on a sink and the components for faucets are also considered plumbing supplies.  Again, faucets can be ordered from Internet supplies so that the homeowner can save a bit of cash on his or her home improvement projects.  Certain tools will be needed in order to properly install the faucets purchased including things like a basin wrench, and plumber’s putty.

A faucet requires either a gasket which is typically sold with the faucet set or the use of plumber’s putty.  The gasket is placed beneath the new faucet and the new faucet is then put into position.  If a gasket is not supplied with the faucet, the homeowner will need to apply plumber’s putty to the bottom of the faucet before putting the faucet into position.  The faucet is also sold with necessary washers and the homeowner must put the washers in place underneath the sink, and tighten up the locknuts with care.

To get sink plumbing supplies online, a consumer can often order all necessary materials from a single supplier.  Often times free shipping options are offered which saves the consumer additional funds.  It may take a few days to receive the plumbing supplies ordered so the homeowner should plan accordingly.

 

Source: Free Articles from ArticlesFactory.com

ABOUT THE AUTHOR

Adam Carter

Looking for a bathroom upgrade? Or maybe you’re in the process of redesigning and would like some ideas. Bathroomsinkguide.com gives you some great ideas regarding bathroom sinks.

Last modified: October 28, 2016

Leave a Reply

Your email address will not be published.